Skip to main content
RACELOGIC Support Centre

07 - VBOX II VBOX Setup Output

flag-de.png

The Output menu can be used to configure the VBOX II digital and analog output signals.
 

VBII VBOX Setup Output.png

  1. Digital 1 (Frequency) and Digital 2

Configure the digital signals on the AD1 and AD2 outputs, select from a range of source channels:

  • Speed - Enter a number of pulses per metre and a maximum speed (km/h). The software will present the expected frequency for the above settings (kHz) and minimum value before output (km/h).
  • GPS Lateral Acceleration - Enter a maximum acceleration (g) value and the frequency. The software will present minimum value before output (g).
  • GPS Longitudinal Acceleration - Enter a maximum acceleration (g) value and the frequency. The software will present minimum value before output (g).
  • Slip Angle - Enter a maximum slip angle (°) value and the frequency. The software will present minimum value before output (°).
  • Pitch Angle - Enter a maximum pitch angle (°) value and the frequency. The software will present minimum value before output (°).
  1. Analogue 1 and Analogue 2

Configure the analogue signals on the AD1 and AD2 outputs, select from a range of source channels:

  • Speed - Enter the speed (km/h) values at 0 and 5 V.
  • GPS Lateral Acceleration - Enter an acceleration (g) or angle (°) value at -5 and 5 V.
  • GPS Longitudinal Acceleration - Enter an acceleration (g) or angle (°) value at -5 and 5 V.
  • Slip Angle - Enter an acceleration (g) or angle (°) value at -5 and 5 V.
  • Pitch Angle - Enter an acceleration (g) or angle (°) value at -5 and 5 V.
  1. Output Test

Set a source value and test the output connected to a device.

  • Was this article helpful?