Getting Started
This page contains important and useful information about the VBOX OLED Display (DSP07-L).
Registration
 |
Box Content
When you purchase an OLED Display DSP07-L (RLVBDSP07-L), you will find the following items when you open the box:
| Product Code | Quantity | Descriptions |
|---|---|---|
| VBDSP07-L | 1 | OLED Display Unit with Lemo Connector |
| RLACS287 | 1 | Suction Mount |
OLED Display Unit
Buttons
 |
Depending on which mode is currently active on the screen, the function of the OK button will change. The splash screen shown when scrolling through the menu describes the function of the OK button in each mode. You can also find the complete list below. |
 |
The large button on the left side of the display will act as a shortcut between settings and display modes. |
| Display Mode | Function |
|---|---|
| Menu | Access the Menu |
| Speed | Start and stop logging |
| Max Speed | Reset max speed value |
| Predictive Lap Timing |
|
| Lap Timing | Set a new start/finish line |
| Lap Count | No action |
| Lateral G | Reset max g reached |
| Longitudinal G | Reset max g reached |
No Media
If you do not have an SD card inserted in your VBOX data logger, the OLED Display will show a No Media message while the vehicle is moving at speeds of 5 mph or less. This makes it easier for you to make sure that you have an SD card inserted before you start your logging.