Menu Options

Scene Selection

Default

Each VBOX data logger has a default scene included within the firmware. Press the OK button when this option is highlighted to use this scene.

Back

Press the OK button with this line highlighted to exit the Scene Selection and go back to the Main Menu.

Track Selection 

When the Video VBOX has acquired satellites, it will check the GPS location against Racelogic’s track map database and load the available layouts.

You must use this menu option to select the layout you are driving as this allows the Mini OLED Display to load the correct start/finish line(s). 

If start/finish lines are not available for your location, you can set them manually.

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

View Lap Times

The Mini OLED Display will store all the lap times from your current session (maximum of 99 lap times). The lap times will be cleared when you set a new start line or when you reset the lap timing data.

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

Clear Lap Times

Selecting this option will wipe all stored lap times from the unit’s memory. It will automatically take you back to the Main Menu after clearing the history.

Predictive Settings

Delta V 

This setting affects the sensitivity of the Delta-V LEDs used in predictive lap timing mode to indicate if the current vehicle speed is faster or slower than the speed was at the same position in the reference file.

Press the OK button when the LED Range is highlighted to scroll through different speed options. Press the OK button again to confirm your selection.

ComboG Mode

ComboG Mode

Max braking G

Max Cornering G

LED Min. %

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the predictive settings.

Transfer Ref. Lap to XXX

This feature lets you save a reference lap for future use. Insert an SD card into the connected Video VBOX unit and use the following menu options.

Note: The vehicle must be stationary to make this transfer.
 

Load Ref. Lap from XXX

To load a reference lap file stored from a previous session, put the desired file onto an SD card and load the card into Video VBOX. The file must be named OLED.REF and placed in the root directory of the SD card. Select the following menu options.

Note: The vehicle must be stationary to make this transfer.

Min Laptime

This setting allows you to set a minimum time for laps, making shorter laps invalid. Invalid laps will not be counted in the lap count, appear in the lap times or used as a reference lap. 

Press the OK button to change the minimum lap time. You will see two arrows (up and down) appear next to the number. Use the two arrow buttons on the device to increase/decrease the minimum time. Press the OK button again to confirm your selected value. 

The default setting is 00:20.

Fixed Lap Mode

Press the square button to toggle between the available settings:
Fix Current and Fix Stored. 

Note: When you have fixed a reference lap, you will see a message confirming your selection on the screen and a Padlock icon will appear. If you fix a stored lap the icon will appear instantly, if you fix the current lap, the icon will appear when the lap has been completed. 

Fixed Stored

Fix Current

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

Lap Timing Menu

Set Start & Splits

Pressing the OK button sets a new start/finish point. After this, the Mini OLED Display will read “Set split 1”. Press the OK button to set the split or ▼ to skip through split points, finish line and back. If you set a new start/finish or split line, the lap count, best lap and all the best split time values will be reset automatically.

Clear Start & Splits

Press the OK button to clear any start/finish and split point information from the Mini OLED Display's memory.

Note: If the Mini OLED is connected to a VBOX data logger, this will also clear the start/finish points in the memory on the VBOX unit.

Reset L/T Data

With this option highlighted, press the OK button to reset the stored reference lap, lap count and lap times.

Note: This option fully resets all lap timing information on the Mini OLED Display.

Display Time

This function allows you to set how long the split time is shown on the Mini OLED Display when a split line or the start/finish line is crossed. There is a choice of 2s, 5s, 10s, 15s or 20s. Press the OK button to cycle between these options. The default setting is 5 s.

Split to Split Time

When this option is selected then the calculated split times will be split to split and not accumulative from the start of the lap.

This is disabled by default. 

Rolling Lap Time

Selecting this function will show a continuously counting lap time which briefly freezes as the start/finish line is crossed.

This is enabled by default. 

One Shot Mode

When one shot mode is enabled, timing will start when movement is detected, after being stationary for more than 10 seconds. This will automatically reset when the user comes to a stop. After 2 seconds of being stationary, the screen counts down from 5 then shows ARMED – Start when ready. 

This is disabled by default.

Gate Width

Press the OK button to change the gate width. Use the up and down buttons to increase/decrease the width of the gate. Press the OK button again to confirm your selected distance. 

The default width is 25 m.

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

About

In this section, you can find the serial numbers and firmware version for the Mini OLED and for the connected VBOX unit.

The firmware version of the OLED Display will also be visible on the screen while it boots up.

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

Exit

Press the OK button with this line highlighted to exit the Menu and go back to the Display Modes.