Refine results by selecting a filter or click on 'All results' to search the whole site.
Skip to main content
RACELOGIC Support Centre

Menu Options

  1. Last updated
  2. Save as PDF
You can access the menu on the Mini OLED Display by pressing the OK button when the ‘Menu’ screen is displayed. You can navigate the menu with the ▲▼ buttons. VBOX Mini OLED Menu-ok_to_select.png

Scene Selection

Specific

You can load up to 8 user-defined scenes to the unit by placing them in the root folder of an SD card and inserting them into the connected Video VBOX. All the required scenes must be loaded at the same time because scenes loaded after will overwrite those previously saved on the unit. You can select the scene on the Mini OLED Display. If a selection of scene files have been loaded onto a Video VBOX, a screen will prompt you to select a scene when you power up the Mini OLED Display.

If you press the ▼ button when you see this prompt, the Mini OLED Display will show you a list of available scenes.

Once the Mini OLED Display is powered and in use, you can access the scene selection through the Main Menu.

Notes:

  • If you are using a VBOX Video HD2, selecting a scene will make the 'OK' light will flash amber and the Mini OLED Display will read 'Installing scenes, please wait'. The unit will automatically power cycle itself if needed after scene installations.
  • "XXX" represents the name/type of the connected VBOX data logger. For example, HD2 or VVB.

VBOX Mini OLED Menu-scene_selection.png

VBOX Mini OLED - scene selection-specific_scene (400px).png

Default

Each VBOX data logger has a default scene included within the firmware. Press the OK button when this option is highlighted to use this scene.

 VBOX Mini OLED - scene selection-default (400px).png

Back

Press the OK button with this line highlighted to exit the Scene Selection and go back to the Main Menu.

 VBOX Mini OLED - scene selection-back (400px).png

Track Selection 

When the Video VBOX has acquired satellites, it will check the GPS location against Racelogic’s track map database and load the available layouts.

You must use this menu option to select the layout you are driving as this allows the Mini OLED Display to load the correct start/finish line(s). 

If start/finish lines are not available for your location, you can set them manually.

 VBOX Mini OLED Menu-track_selection.png

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

 VBOX Mini OLED - track selection (400px).png

View Lap Times

The Mini OLED Display will store all the lap times from your current session (maximum of 99 lap times). The lap times will be cleared when you set a new start line or when you reset the lap timing data.

 

VBOX Mini OLED Menu-View_lap_times.png

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

 Template - VBOX Mini LapTimer & OLED - View Lap Times Menu (400px).png

Clear Lap Times

Selecting this option will wipe all stored lap times from the unit’s memory. It will automatically take you back to the Main Menu after clearing the history.

 VBOX Mini OLED Menu-clear_lap_times.png

Predictive Settings

 VBOX Mini OLED Menu-Predictive_settings (400px).png

Delta V 

This setting affects the sensitivity of the Delta-V LEDs used in predictive lap timing mode to indicate if the current vehicle speed is faster or slower than the speed was at the same position in the reference file.

Press the OK button when the LED Range is highlighted to scroll through different speed options. Press the OK button again to confirm your selection.

 VBOX Mini OLED Main Template - predictive settings - deltaV (400px).png

ComboG Mode

VBOX Mini OLED Main Template - predictive settings - comboG (400px).png

VBOX Mini OLED Main Template - ComboG Mode menu (400px).png
ComboG Mode
 When you have selected this mode, the Mini OLED shows combined g information via the LEDs, encouraging you to push your car at braking points and turns to improve lap times. This mode is disabled by default.
Max braking G

You can set the maximum braking g indicated by the LEDs (max is 1.9 g), by pressing the OK button with this line highlighted. In the selector, you use the up and down buttons to increase or decrease the value. Press the OK button to confirm your selection and go back to the ComboG menu.

Default is 1.0.
Max Cornering G

You can set the maximum cornering g indicated by the LEDs (max is 1.9 g), by pressing the OK button with this line highlighted. In the selector, you use the up and down buttons to increase or decrease the value. Press the OK button to confirm your selection and go back to the ComboG menu.

Default is 1.0.
LED Min. %

You can configure the minimum percentage for the LED, deciding when the LED colours appear. Press the OK button to open the selector and use the up and down buttons to change the percentage. Press the OK button again to confirm your selected value. 

You can find more information on how this mode affects the LEDs, in the Combo G LEDs section.

Default is 50%.
Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the predictive settings.

 VBOX Mini LapTimer & OLED Main Template - ComboG Mode_back (400px).png

Transfer Ref. Lap to XXX

This feature lets you save a reference lap for future use. Insert an SD card into the connected Video VBOX unit and use the following menu options.

 

Note: The vehicle must be stationary to make this transfer.
 

 

 VBOX Mini OLED Main Template - predictive settings - Transfer (400px).png

Load Ref. Lap from XXX

To load a reference lap file stored from a previous session, put the desired file onto an SD card and load the card into Video VBOX. The file must be named OLED.REF and placed in the root directory of the SD card. Select the following menu options.

Note: The vehicle must be stationary to make this transfer.

 VBOX Mini OLED Main Template - predictive settings - load (400px).png

Min Laptime

This setting allows you to set a minimum time for laps, making shorter laps invalid. Invalid laps will not be counted in the lap count, appear in the lap times or used as a reference lap. 

Press the OK button to change the minimum lap time. You will see two arrows (up and down) appear next to the number. Use the two arrow buttons on the device to increase/decrease the minimum time. Press the OK button again to confirm your selected value. 

The default setting is 00:20.

 

 VBOX Mini OLED - predictive settings - Min_laptime (400px).png

Fixed Lap Mode

Press the square button to toggle between the available settings:
Fix Current and Fix Stored. 

Note: When you have fixed a reference lap, you will see a message confirming your selection on the screen and a Padlock icon will appear. If you fix a stored lap the icon will appear instantly, if you fix the current lap, the icon will appear when the lap has been completed. 

VBOX Mini OLED - predictive settings - Fixed_lap_mode (400px).png

VBOX Mini OLED-fix stored lap (400px).png
Fixed Stored
 When you have selected this option, pressing the OK button in while in Predictive Lap Timing mode sets the reference lap that is currently stored in the memory as the fixed reference. Fix Stored is the default setting. 
Fix Current

When you have selected this option, pressing the OK button while in Predictive Lap Timing mode sets the reference lap once the current lap is completed.

Note - if you choose to fix the current lap, this should override any Minimum Lap Time setting as you are making the decision to set the current and full lap as the reference.

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

 VBOX Mini OLED-predictive settings-Back (400px).png

Lap Timing Menu

 VBOX Mini OLED Menu-lap_timing (400px).png

Set Start & Splits

Pressing the OK button sets a new start/finish point. After this, the Mini OLED Display will read “Set split 1”. Press the OK button to set the split or ▼ to skip through split points, finish line and back. If you set a new start/finish or split line, the lap count, best lap and all the best split time values will be reset automatically.

 VBOX Mini OLED Main Template - Lap Timing-Set_start_and_splits (400px).png

Clear Start & Splits

Press the OK button to clear any start/finish and split point information from the Mini OLED Display's memory.

Note: If the Mini OLED is connected to a VBOX data logger, this will also clear the start/finish points in the memory on the VBOX unit.

 VBOX Mini OLED Main Template - Lap Timing-clear_start_and_splits (400px).png

Reset L/T Data

With this option highlighted, press the OK button to reset the stored reference lap, lap count and lap times.

Note: This option fully resets all lap timing information on the Mini OLED Display.

 VBOX Mini OLED Main Template - Lap Timing-reset_l_t_data (400x).png

Display Time

This function allows you to set how long the split time is shown on the Mini OLED Display when a split line or the start/finish line is crossed. There is a choice of 2s, 5s, 10s, 15s or 20s. Press the OK button to cycle between these options. The default setting is 5 s.

 

 VBOX Mini OLED Main Template - Lap Timing-display_time (400px).png

Split to Split Time

When this option is selected then the calculated split times will be split to split and not accumulative from the start of the lap.

This is disabled by default. 

 VBOX Mini OLED Main Template - Lap Timing-split_to_split_time (400px).png

Rolling Lap Time

Selecting this function will show a continuously counting lap time which briefly freezes as the start/finish line is crossed.

This is enabled by default. 

 VBOX Mini OLED - Lap Timing- rolling_lap_time (400px).png

One Shot Mode

When one shot mode is enabled, timing will start when movement is detected, after being stationary for more than 10 seconds. This will automatically reset when the user comes to a stop. After 2 seconds of being stationary, the screen counts down from 5 then shows ARMED – Start when ready. 

This is disabled by default.

 VBOX Mini OLED Main Template - Lap Timing-one_shot_mode (400px).png

Gate Width

Press the OK button to change the gate width. Use the up and down buttons to increase/decrease the width of the gate. Press the OK button again to confirm your selected distance. 

The default width is 25 m.

 VBOX Mini OLED Main Template - Lap Timing-gate_width (400px).png

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

 VBOX Mini OLED Main Template - Lap Timing-back (400px).png

Display Menu

 VBOX Mini OLED Menu-display_menu (400px).png

Modes

You can choose between Basic Mode and Advanced Mode for the display on the Mini OLED Display. 

With Advanced Modes you keep the full functionality of the Mini OLED Display and with Basic Modes you can reduce the amounts of visible Display modes, giving you the option to shorten your display mode list if you don't need them all.

The tables below list the Display Modes available in each Display Menu Mode. 

Press the OK button to enter the selector and use the up and down buttons to toggle between the two options. Press OK again to confirm your selection.

VBOX Mini LapTimer & OLED Main Template - Display menu-Modes (400px).png

VBOX Mini OLED Main Template - Modes-advanced_modes (400px).png
Basic Modes
Basic Features (Default)
Speed
Lap Timing
Predictive Lap Timing
Menu
Advanced Modes
Advanced Features
Speed
Lap Timing
Predictive Lap Timing
Menu
Max Speed
Speed Bar
Lateral G
Longitudinal G
Lap Count

Speed Settings

 

 VBOX Mini LapTimer & OLED Main Template - Display menu-Speed_settings (400px).png
Units

If the OK button is pressed the Mini OLED display allows the user the ability to select the units of the displayed speed.  Highlight the desired measurement type and press OK to select. mph, km/h, kts.

The default setting is km/h.

 VBOX Mini OLED Main Template - Speed settings - units (400px).png
Decimal Places

Pressing the OK button will cycle through 0, 1, and 2 decimal places, 0 is the default setting.

 VBOX Mini OLED Main Template - Speed settings - decimal_places (400px).png
Speed Alert

When enabled, Speed Alert will only operate when the VBOX Mini OLED is set to Speed Mode. The Speed Alert Mode is set to off (unticked) by default. 

When you enable Speed Alert, your Mini OLED will beep and have solid red LEDs if it logs a speed of more than the set speed alert value for longer than 1 second. The alert will stop when your logged speed goes below the set speed alert value.

VBOX Mini OLED Main Template - Speed settings - Speed_alert (400px).png

VBOX Mini LapTimer & OLED Main Template - Speed alert menu (400px).png

Speed Alert

 Press the OK button when this line is highlighted to enable the Speed Alert mode. This is disabled by default.

Alert Speed 

 Press the OK button to change the Alert Speed. Use the up an down buttons on the device to increase/decrease the speed and set a value between 0 and 999. Press the OK button again to confirm your selected speed. 

Back

 Press the OK button with this line highlighted to exit the Speed Alert menu and go back to the Speed settings.
Back

Press the OK button with this line highlighted to exit the Speed Settings and go back to the Display menu.

 VBOX Mini OLED Main Template - Speed settings - Back (400px).png

Brightness

Press the OK button to cycle through five brightness settings for the display. 1 is the darkest setting and 5 is the brightest setting. The display will change its brightness as you cycle through each setting to make it easier to find the correct level for you. 

The default setting is 5.

 VBOX Mini LapTimer & OLED Main Template - Display menu-brightness (400px).png

LED brightness

Press the square button to cycle through five brightness settings for the LEDs. 1 is the darkest setting and 5 is the brightest setting. The LEDs will increase in brightness as you cycle through each setting to make it easier to find the correct level for you.


Note: The default setting is 3, level 5 is extremely bright!

 VBOX Mini LapTimer & OLED Main Template - Display menu-led_brightness (400px).png

Invert Colour

Pressing the OK button when an option is highlighted allows it to be turned on or off. When the option is enabled, a tick will appear next to it and the colours on the display will be inverted.

Note: The Invert Colour (white background with black text) is ticket by default. 

VBOX Mini LapTimer & OLED Main Template - Display menu-invert_colour (400px).png

VBOX Mini LapTimer & OLED Main Template - Colours_inverted (400px).png

Back

Press the OK button with this line highlighted to exit the Display Menu and go back to the Main Menu.

 VBOX Mini LapTimer & OLED Main Template - Display menu-back (400px).png

About

In this section, you can find the serial numbers and firmware version for the Mini OLED and for the connected VBOX unit.

The firmware version of the OLED Display will also be visible on the screen while it boots up.

 VBOX Mini OLED Menu-about (400px).png

Back

Press the OK button with this line highlighted to exit the Lap Times and go back to the Main Menu.

 VBOX Mini LapTimer & OLED Main Template - About-back (400px).png

Exit

Press the OK button with this line highlighted to exit the Menu and go back to the Display Modes.

 VBOX Mini OLED Menu-exit (400px).png
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Topic
  2. Tags
    This page has no tags.