Skip to main content
RACELOGIC Support Centre

Getting Started


Please register your OLED Display so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product, and offer technical support.

Register your device here.


What is in the box?

When you purchase a OLED Display DSP04, you will find the following items when you open the box:

Product Code Quantity Description
VBDSP04 1 OLED Display Unit
RLACS287 1 VBOX Lightweight Suction Mount
RLCAB063 1 5-way Fischer Plug to 5-way Lemo Plug - 2 m 



  • View parameters, such as Live Speed, Max Speed, Lap Times and Predictive Lap Time
  • Internal accelerometer flips the display according to the mounting direction
  • Invert screen colours or change font options for varying operation conditions
  • Shows logging and capacity status of connected VBOX data loggers
  • Easy operation with the 3-button keypad
  • Recognises data from standard VBOX CAN and serial output
  • Low power consumption
  • Motorsport standard Fischer Lemo connectors
  • Recognises serial data output from all compatible VBOX data loggers

Square Button Functions

Depending on which mode is currently active on the screen, the function of the square button will change. The splash screen shown when scrolling through the menu describes the function of the square button in each mode.

You can also find the complete list below:

Square button.png
Mode Function
Speed  Start and stop logging
Max Speed Reset max speed value
Speed Bar Set centre speed and speed display range
Predictive Lap Timing Single Press fixes the reference lap according to your settings in Fixed Lap Mode
Predictive Lap Timing Pressing for >4 s clears the stored reference lap and all lap timing data
Lap Timing Set a new start/finish line
Lap Count No action
Lateral G Reset max g reached
Lateral G Bar Set min g and max g (targets)
Longitudinal G Reset max g reached
Longitudinal G Bar Set min g and max g (targets)
Menu Access the Menu

No Media 

If you do not have an SD card inserted in your VBOX data logger, the OLED Display will show a "No Media" message while the vehicle is moving at speeds of 5 mph or less. This makes it easier for you to make sure that you have an SD card inserted before you start your logging.
  • Was this article helpful?