Skip to main content
RACELOGIC Support Centre

05 - MFD Setup (VBOX Tools)

flag-de.png

VBOX Tools software can be used to be setup MF displays remotely.  When connected to a VBOX the MFD is recognised by the VBOX and a MFD tab appears in VBOX setup.
 

Clicking on the image of the MFD logo in the tab in Multifunction Display tab will bring up a set up window.
 

From within this window all of the functions and display parameters of the MFD can be set. To change any of the displays parameters, click on a title and a new window appears allowing the selection to be changed.
 

vbt1 (1).png
 

The image on the right shows the setup screen for Lap Timing functions of the MFD.

Note that from the Lap Timing setup page Lap and Split positions can be downloaded from or uploaded to the VBOX. 
 

vbt2 (1).png

 

Accel/decel test setup

From within this page the start and end criteria for the Accel and Decel tests can be set.  These Accel and Decel tests run concurrently when either of the Main Screens are displayed.
 

vbt3 (1).png

  • Was this article helpful?