Hardware Connections

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

The articles below describe what hardware is required within a ACC, AEB, BSD or FCW test and how to connect it together.

Hardware Configuration - 1 / 2 Target Vehicles (CAN Hub, NTRIP and IMU)
Hardware Configuration - 1 / 2 Target Vehicles (CAN Hub, Static/Moving Base and IMU)
Hardware Configuration - 1 / 2 Target Vehicles (CAN Hub and NTRIP)
Hardware Configuration - 1 / 2 Target Vehicles (CAN Hub and Static/Moving Base)
Hardware Configuration - 1 / 2 Target Vehicles (NTRIP)
Hardware Configuration - 1 / 2 Target Vehicles (NTRIP and IMU)
Hardware Configuration - 1 / 2 Target Vehicles (Static/Moving Base)
Hardware Configuration - 1 / 2 Target Vehicles (Static/Moving Base and IMU)
Hardware Configuration - 3 Target Vehicles (CAN Hub, NTRIP and IMU)
Hardware Configuration - 3 Target Vehicles (CAN Hub, Static Base and IMU)
Hardware Configuration - 3 Target Vehicles (CAN Hub and NTRIP)
Hardware Configuration - 3 Target Vehicles (CAN Hub and Static Base)
Hardware Configuration - 3 Target Vehicles (NTRIP)
Hardware Configuration - 3 Target Vehicles (NTRIP and IMU)
Hardware Configuration - 3 Target Vehicles (Static Base)
Hardware Configuration - 3 Target Vehicles (Static Base and IMU)
Hardware Configuration - Static Point (CAN Hub, NTRIP and IMU)
Hardware Configuration - Static Point (CAN Hub, Static Base and IMU)
Hardware Configuration - Static Point (CAN Hub and NTRIP)
Hardware Configuration - Static Point (CAN Hub and Static Base)
Hardware Configuration - Static Point (NTRIP)
Hardware Configuration - Static Point (NTRIP and IMU)
Hardware Configuration - Static Point (Static Base)
Hardware Configuration - Static Point (Static Base and IMU)