Skip to main content
RACELOGIC Support Centre

Hardware Configuration - 1 / 2 Target Vehicles (Static/Moving Base)

To connect the hardware when testing with 1 or 2 Target Vehicles, using a Static Base Station or Moving Base solution for ACC, AEB, BSD or FCW tests, please refer to the configurations below:


The following diagrams show the recommended hardware configuration for each Vehicle. The items greyed out are not essential but many customers may find them beneficial. Click on the diagrams to open a high resolution pdf configuration.

Connection between the VB3i and laptop/computer should be made via USB or Bluetooth to ensure optimum performance.


Please ensure that all vehicle antennas are correctly positioned and connected.

Subject Vehicle

Single Multiple Target Vehicles (CAN Hub and NTRIP) - Subject.png

Target Vehicle(s)

Single Multiple Target Vehicles (NTRIP) - Target.png

Radio Selection

ADAS telemetry and DGPS correction radio selection will depend on many factors, including how many Target Vehicles are being used, what geographical location they are being used in and whether you are using a Static Base Station or Moving Base Solution.

  • Was this article helpful?