Skip to main content
RACELOGIC Support Centre

05 Dynamic Modes - VBOX 3iS Single Antenna (v1)

VBOX 3iS has three dynamic modes. These dynamic modes directly change the SMI smoothing index applied by the GNSS engine to all Doppler-derived data, notable speed and heading. The lower smoothing levels have a higher dynamic response but are adversely noisier.

The three options are:

  • High dynamics (default): Should be used for high-accuracy brake stops or any test where time and distance are critical and the vehicle test incorporates highly dynamic manoeuvres.
  • Medium dynamics: Suitable for any testing that does not involve any high dynamic manoeuvres.
  • Low dynamics: Can be used for less dynamic applications, such as steady-stated measurement or coast-downing.


You can change the dynamic mode via the VBOX Setup Software, the Front Panel of the unit, or with VBOX Manager.

  • Was this article helpful?