Refine results by selecting a filter or click on 'All results' to search the whole site.
Skip to main content
RACELOGIC Support Centre

Channels Menu - VBOX 3i RTK with Firmware v2.8

  1. Last updated
  2. Save as PDF
This page covers the Channels menu in VBOX Setup connected to VBOX 3i RTK (v3-v4) unit with firmware version 2.8.
flag-de.png

The Channels menu changes depending on what is connected. If a module is connected when VBOX Setup is already running, clicking ‘Rescan modules’ performs a rescan and anything new connected will show up (and anything disconnected will disappear).

Note: It is not possible to configure a connected MFD Touch unit.

Standard

VB3i VBOX Setup Channels Standard.png

 
  1. Channel

List of standard channels logged by VB3i.

  1. Log to Memory Card

Select to log channel to memory card.

  1. Send Over Serial

Select to send channel over serial.

 

Internal A/D

VB3i VBOX Setup Channels Internal.png

  1. Channel

List of internal A/D channels logged by VB3i. VB3i has 4 A/D inputs, these are on the 25 way D type connector. Pin outs can be found here.

Clicking on any channel box will display a live data reading.

  1. Log to Memory Card

Select to log channel to memory card.

 VB3i VBOX Setup Channels CAN channel properties.png
  1. Send Over Serial

Select to send channel over serial.

Internal CAN Input

VB3i VBOX Setup Channels Internal CAN.png

  1. Channel

List of internal CAN input channels logged by VB3i. The serial number and firmware version is shown at the top of the tab.

A maximum of 16 channels are available and are set up by clicking on any channel box. This brings up a new window, where a CAN database file (.dbc/.ref/.vci) can be loaded, or the channel can be manually defined.
 

​​VB3i VBOX Setup Channels CAN channel properties2.png

  1. Log to Memory Card

Select to log channel to memory card.

  1. Send Over Serial

Select to send channel over serial.

 

Internal Slip/Dual Antenna

Note: This menu only appears with VBOX 3i Dual Antenna (VB3i SL).

VB3i VBOX Setup Channels Internal Dual.png

  1. Channel

List of internal slip/ dual antenna channels logged by VB3i. Clicking on any channel box will display a live data reading.

  1. Log to Memory Card

Select to log channel to memory card.

  1. Send Over Serial

Select to send channel over serial.

 

ADAS 1

Note: This menu only appears when an ADAS mode is enabled and will vary dependent on the specific mode (screenshots based on '2 Target' mode).
 

VB3i VBOX Setup Channels ADAS1.png

  1. Channel

List of ADAS 1 channels logged by VB3i. Clicking on any channel box will display a live data reading.

  1. Log to Memory Card

Select to log channel to memory card.

  1. Send Over Serial

Select to send channel over serial.

 

ADAS 2

Note: This menu only appears when an ADAS mode is enabled and will vary dependent on the specific mode (screenshots based on '2 Target' mode).
 

VB3i VBOX Setup Channels ADAS2.png

  1. Channel

List of ADAS 2 channels logged by VB3i. Clicking on any channel box will display a live data reading.

  1. Log to Memory Card

Select to log channel to memory card.

  1. Send Over Serial

Select to send channel over serial.

 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Reference
    Audience
    Public
    Content Reuse
    Target - Page
    Article Status
    Published
  2. Tags
    This page has no tags.