03 - VBOX II VBOX Setup Channels
The Channels menu changes depending on what is connected. If a module is connected when VBOX Setup is already running, clicking ‘Rescan modules’ performs a rescan and anything new connected will show up (and anything disconnected will disappear).
Standard
-
Channel
List of standard channels logged by VBOX II.
-
Log to Memory Card
Select to log channel to memory card.
-
Send Over Serial
Select to send channel over serial.
Internal Slip Angle
Note: This menu only appears with VBOX II Dual Antenna (VB20SL).
-
Channel
List of internal slip/ dual antenna channels logged by VBOX II.
-
Log to Memory Card
Select to log channel to memory card.
-
Send Over Serial
Select to send channel over serial.
Internal VCI
Note: This menu only appears when CAN mode is set to VCI MODE.
-
Channel
List of internal CAN input channels logged by VBOX II. The serial number and firmware version is shown at the top of the tab.
A maximum of 16 channels are available and are set up by clicking on any channel box. This brings up a new window, where a CAN database file (.dbc/.ref/.vci) can be loaded using the 'Load' button or the channel can be manually defined. Alternatively, if you select the 'Vehicle database' option, you can browse the vehicle CAN database and select CAN channels specific to your vehicle. If available, CAN connection information for the vehicle will also appear on the right.
Note: Although 16 channels can be defined, only 10 channels can be selected to log to memory card/sent over serial.
|
|
-
Log to Memory Card
Select to log channel to memory card.
-
Send Over Serial
Select to send channel over serial.