06 Connecting to the Vehicle CAN Bus - VBOX Video HD2 (v6)
- Last updated
-
-
Save as PDF
-
VBOX Video HD2 has the ability to capture up to 80 CAN channels from Racelogic modules and/or from a vehicle CAN bus system.
As well as Software Configuration (Windows / macOS), a hardware connection must be made to the vehicle’s CAN bus system.
- To connect the HD2 system to an OBDII port, an RLCAB069L cable must be used.
Click here for a cable drawing including PIN outs for the RLCAB069L.
- To connect the HD2 system to a vehicle CAN bus system using a bare wire, an RLCAB015L cable must be used.
Click here for a cable drawing including PIN outs for the RLCAB015L.
- To connect the HD2 system to a vehicle CAN bus system by clipping onto the wires, an RLACS182L cable must be used.
Note: If the connection needs to be made using a bare wire interface with the CAN Hi and Lo outputs of the vehicle, we strongly recommend contacting a qualified auto-electrician to perform the fitting.
You can find connection diagrams for HD2 units with and without an OLED display in each HD2 version's User guide:
