02 - VPRS Hardware Installation
Below is the layout for a VPRS installation of both Beacon and Rover. The greyed out elements are only necessary if the VPRS requires reconfiguration.
- If the system is being used in conjunction with VBOX 3i, use an RLCAB120 cable to connect the Power/CAN/Serial port on the Rover to the VCI CAN port on VB3i, which by default is the SER port.
- If the system is being used in conjunction with VBOX Touch, use an RLCAB120 cable to connect the Power/CAN/Serial port on the Rover to a 'CAN/SERIAL' port on VBOX Touch.