Skip to main content
RACELOGIC Support Centre

ACSF - 3 Target, Static Base, IMU Roof, 2 Points

  • This guide will take you through a step by step process of setting up VBOX 3i units for ADAS Automatically Commanded Steering Function (ACSF)/ Lane Change testing.
  • Expand the contents using the + button to see the list of articles contained within this guide.
  • The next Forward Button.pngarticle can be selected at the top or bottom of the screen to carry on through the guide.
  • The progress bar at the top of the page shows what step you are at within the guide.

    Navigation.png
For a full download of this ADAS User Guide, please click on the PDF icon pdf icon.png

 

Automatically Commanded Steering Function (ACSF)/ Lane Change Testing

VBOX 3i enables engineers to log positional and time-to-collision data from up to 3 moving targets and a lane simultaneously, allowing them to meet the guidelines set out by the new Lane Change Test for Automatically Commanded Steering Function (ACSF).


ACSF testing and validation can be conducted on the test track using a static DGPS Base Station or via an NTRIP correction solution.

Parameters

ADAS Test Automatically Commanded Steering Function (ACSF)/ Lane Change
Vehicles 1 Subject and 3 Target Vehicles
DGPS Correction Method Static Base Station
IMU Integration Roof Mounted
CAN Hub No
Two Way Communication Yes
Vehicle Contact Points Up to 2


IMPORTANT - Please ensure that all product Firmware and Software versions are up to date!

  • Was this article helpful?