Skip to main content
RACELOGIC Support Centre

VBOX 3i ADAS Setup

An overview of the VBOX Setup software with VBOX 3i ADAS connected.  From this page you can find links to more information about the individual tabs available in the Setup software.


The best way to configure your VBOX 3i ADAS is to use the VBOX Setup Software. You can download the VBOX Setup software here.

Alternatively, you can also configure some settings with the VBOX Manager. You can find an overview of the available settings on a VBOX Manager connected to a VBOX 3i ADAS here.  


The connection between the VBOX unit and the computer should be made via USB or Bluetooth for optimum performance.

When the VBOX unit is physically connected and powered, open the VBOX Setup software and use the drop-down list to select the COM port that the VBOX unit is connected to. Click Connect and VBOX Setup will open the setup screen for your VBOX unit. 


Note: You may see an auto-detect message if you have changed the baud rate from the default value. Click Yes to allow the different baud rates to be scanned.

Available menus The menu buttons in the sidebar allows you to select between the different settings menus. Click the buttons to change the menu. VBOXSetup_GeneralMenu_button_framed.png
Menu title Displays the title of the currently selected menu. General_current_menu.png
Help Depending on which menu you have open, the question mark icon will open up the corresponding User Guide page within the Racelogic Support Centre. General_Help.png
Language Change the operating language. General_Language.png
Settings area The white area in the application window contains all the settings. These will vary depending on the selected menu. General-default_Settings Area_cropped.png
Write to unit After making changes to the setup, you must press the Write to unit button to make sure that the settings are uploaded to the connected VBOX unit. General_Write to unit.png
Close Closes the software, if changes have not been saved to the unit, you will be prompted to save the settings. General_Close.png

Settings Menus

The sidebar enables you to switch between the different settings menus. Click on the images below to find more information about each menu.

General Menu


Channel Config Menu


Logging Menu


GPS Menu


Dual Antenna Menu


IMU Menu




CAN Menu


Advanced Menu


  • Was this article helpful?