Sign In |
Support Centre Logo Small

Quick Start Guide

Updated on May 20, 2026

VBOX Pit Lane Timers with Rear and Side Connectors #

(RLVBPIT-S/RLVBPIT-R)

VBOX Pit Lane Timer is a GNSS-based display system designed to monitor pit lane timing and vehicle speed during motorsport events.

The unit supports two display modes:

  • Pit Lane Timing
  • Speed Display

All logged data is recorded to the inserted SD card.

Before You Start #

What is in the Box? #

A typical kit includes:

  • VBOX Pit Lane Timer unit
  • Power cable (vehicle supply)
  • SD card
  • GNSS antenna
  • Mounting solution

Setup #

1. Insert the SD Card #

Insert a FAT32-formatted SD card into the side of the unit. For reliable operation, use a Class 10 card or higher.

All logged data is recorded directly to the SD card.

2. Connect and Place the GNSS Antenna #

Connect the supplied GNSS antenna to the antenna connector.

For best results:

  • Mount the antenna on the vehicle roof
  • Ensure a clear view of the sky
  • Avoid mounting near roof bars or other metal objects

Correct antenna placement is important for reliable lap timing and speed measurements.

3. Connect Power #

Connect the supplied power cable to the POWER connector on the unit and to a compatible 12 V vehicle power source.

The unit will power on automatically.

When powered on, the unit will:

  • Search for satellites
  • Detect the SD card
  • Turn on the LEDs (white) in a sweeping motion

4. Mount the Unit #

Mount the unit securely in a visible location using the supplied mount.

RLVBLAP-R units can be permanently mounted using the supplied rear bracket.

5. Select a Display Mode #

Use the arrow buttons to select the required display mode.

Available modes include:

  • Pit Lane Timing
  • Speed Display

The selected mode determines the information shown on the display during use.

The unit will remember the previously used display mode after power cycling.

Check it is Working #

The system is ready when:

  • Satellite lock has been acquired
  • An SD card is inserted
  • The required display mode has been selected
  • Live data is visible on the display

If the unit cannot detect an SD card, it will display a No Media message while the vehicle is travelling at 5 mph or less.

Ready for Use #

Once set up:

  • The unit is ready for basic use
  • The unit is ready to log data to the SD card
  • Additional configuration can be completed if required

You are now ready to begin driving.

Logging Data #

The unit records data to the SD card while logging is active.