08 - VBOX Test Suite Test Setup
- Last updated
-
-
Save as PDF
-
The Test Setup area is where the user can control and configure the currently selected test. This tab will be displayed when the user clicks anywhere on the map area and will automatically be selected.
This tab will be unique to each plugin - so for more information, please see the relevant article for each test.
Accel test example
Select a plugin below to view more information or view the Plugin Guide Area.
|
CustomTest
Complete a wide range of tests to a set of conditions
|
Accel Test
Complete acceleration tests
Decel Test
Complete deceleration tests
Lane Change
Complete and analyse various different lane Change tests, such as the ISO 3888-2
Lap Timing
Analyse lap times
|
Euro NCAP AEB
Test to the Euro NCAP CCRs, CCRm and CCRb AEB protocols
Park Assist
Validate Park Assist systems to ISO regulation 204/WG14 ISO 16787
UNR79 CSF
Complete and analyse a Commanded Steering Function test as described in the UNR79 document
UNR79 Lane Keeping
Complete and analyse a Lane Keeping Function test as described in the UNR79 document
UNR79 Max Lateral Accel
Complete and analyse a Maximum Lateral Acceleration test as described in the UNR79 document
|
|
Tyre Traction
Compare the traction forces and wheel slip of different tyres
Lateral Aquaplane
Measure the lateral aquaplane performance of a given tyre based on speed and attained lateral acceleration
Longitudinal Aquaplane
Measure when aquaplaning starts to occur and the percentage of wheel slip during aquaplaning
|
WLTP GTR15 Coastdown
Complete and analyse a coastdown test to the latest WLTP Coastdown protocol
SAE J2263 Coastdown
Complete a coastdown test to the SAE J2263 specification
ABNT 10312 Coastdown
Complete and analyse a coastdown test to the latest ABNT 10312 Coastdown protocol
|
Brake Trigger
Analyse brake stops from either a brake trigger or from a user defined CAN channel
Brake Speed
Analyse brake stops from a user defined start speed
R78 Motorcycle Brake Force
Analyse motorcycle brake stops from either a brake trigger or from a user defined CAN channel, such as brake pressure or brake position
R139 Brake Assist, Category B (beta)
Carry out a brake assist test in accordance with the R139 regulation
SAE J2909 Brake Force
Complete brake stops that conform to the SAE J2909 specification
|
|
EPA (beta)
Carry out a pass-by-noise test in accordance with the EPA regulation
R117 Pass-By Noise
Carry out a pass-by-noise test in accordance with the R117 regulation
R138 Pass-By Noise
Carry out a pass-by-noise test in accordance with the R138 regulation
R41 Pass-By Noise
Carry out a pass-by-noise test in accordance with the R41 regulation
R51 Pass-By Noise
Carry out a pass-by-noise test in accordance with the R51 regulation
|
|
