You can access the menu by pressing the OK button. Use the Up and Down arrows to navigate through the menu and press the OK button to enter a submenu or change a setting. When you edit a setting, the Up and Down buttons will let you scroll through the available options for that setting and the OK button will confirm your selection. Use the Back button to exit a setting.
You can use this menu to configure the CAN settings.
You can access the menu by pressing the OK button. Use the Up and Down arrows to navigate through the menu and press the OK button to enter a submenu or change a setting. When you edit a setting, the Up and Down buttons will let you scroll through the available options for that setting and the OK button will confirm your selection. Use the Back button to exit a setting.
You can use this menu to configure the CAN settings.
In this setting you can select the CAN baud rate at which the data will be transmitted from the unit.
- 125 kbit/s
- 250 kbit/s
- 500 kbit/s (default)
- 1 Mbit/s
In this setting you can select the CAN baud rate at which the data will be transmitted from the unit.
- 125 kbit/s
- 250 kbit/s
- 500 kbit/s (default)
- 1 Mbit/s
Enables or disables the CAN Termination.
Enables or disables the CAN Termination.
Determines the rate at which data is sent out via CAN.
- 1 Hz
- 5 Hz
- 10 Hz
- 20 Hz
- 50 Hz
- 100 Hz (default)
Determines the rate at which data is sent out via CAN.
- 1 Hz
- 5 Hz
- 10 Hz
- 20 Hz
- 50 Hz
- 100 Hz (default)
